The Multi Lock access floor panels are structurally rigid linear assemblies fabricated from non-combustible components and consists of high hardness top steel sheet, welded to a deep drawing steel bottom section of domed formation. The underside of the panel shall consist of a specially designed four Corner self-locating and multi locking system. It has 96 conave welded domes which is 33% more than the traditional linear design. The panel has a narrower flange that improves the rolling load capacity of the system. All these additional design features result in the higher dimensional precision and panel strength.
The exterior and interior surface of the panel is corrosion protected. The core of the panel is filled with a non-combustible cementitious compound.
The exterior of the panel is epoxy coated.
The MULTI LOCK Under-Structure System
The Multi Lock Under-Structure System is generic to the Freestanding System, the Screw-Down System and the Bolt-on Stringer System. The understructure is universal to all 3 grades of floors, ranging from standard to heavy duty floors. The system consists of a steel die formed, factory assembled head and base which is surface treated with a corrosion-resistant finish. This assembly is capable of supporting a minimum load of 22.5kN. The Under structure must comply with CISCA Section 5 of 2007 test procedures for Pedestal Axial load.
A corrosion resistant lock nut with an anti-rotation & vibration proof feature is provided to allow the
pedestal assembly to be adjusted over a range of 50mm (25mm up and 25mm down).